Darda Rock Splitters C20 C
ROCK SPLITTERS
(C20C)
• Easy replacement of wear parts
• Rotatable and very maneuverable
• Automatic wedge lubrication
• Multiple mounting options
• Lowest power-to-weight ratio on the market
• Use even under water
MODEL C20C | |
Dimension (LxWxH) | 1720 x 305 x 394 mm |
Weight | 300 kg 660 lb |
CARRIERS | |
Recommended carrier weight³ | 5 - 7 t |
HYDRAULIC CONNECTION | |
Connection pressure, min. | 17.5 MPa (175 bar) |
Connection pressure, max. | 25 MPa (250 bar) |
Oil flow, min. - max. | 25 - 100 l/min |
Rotary drive connection pressure, max. | 25 MPa (250 bar) |
Rotary drive oil flow, max. | 30 l/min |
Operating pressure | 50 MPa (500 bar) |
WEDGE SET | |
Wedge set length N / L | 640 / 840 mm |
Drillhole diameter | 76 mm |
Drillhole depth N / L, min. | 750 / 950 mm |
Splitting distance N / L | 22 / 25 mm |
Theoretical splitting force N / L | 1500 / 1800 t |
CONSUMABLES | |
Darda Special Lubricant |
1. Chain – vertical operation
Chain-suspended from carrier machine. Can be attached to almost any hydraulic boom by chain suspension, which makes it very flexible. Direction constant according to the force of gravity. Definition of the splitting direction and the splitting course by second operator.
2. Internal pressure booster
Full splitting force independent of the input pressure of the carrier thus always guaranteed.
Lubrication system and shut-off device guarantee lifetime and cost savings.
Factory setting allows 80 – 100 splits per filling. Lubricant quantity adjustable.
Ready for use again in the shortest possible time due to cartridge filling via rechargeable battery refill pump.
Two possible lengths can be selected depending on the type of rock and rock composition.
Hard metal layer of the counter wedges enables the transmission
of the very high forces and provides long-lasting protection against corrosion, seizure and wear.
Inquiry - Darda Rock Splitters C20 C