Darda Rock Splitters C20 J
ROCK SPLITTERS
(C20J)
• Easy replacement of wear parts• Rotatable and very maneuverable
• Automatic wedge lubrication
• Multiple mounting options
• Lowest power-to-weight ratio on the market
• Use even under water
MODEL C20J | |
Dimension (LxWxH) | Horizontal 2153 x 450 x 420 mm |
Weight | 390 kg 860 lb |
CARRIERS | |
Recommended carrier weight³ | 11000 - 16000 lb |
HYDRAULIC CONNECTION | |
Connection pressure, min. | 2538 psi |
Connection pressure, max. | 3626 psi |
Oil flow, min. - max. | 7 - 27 gal/min |
Rotary drive connection pressure, max. | 3626 ps |
Rotary drive oil flow, max. | 8 gal/min |
Operating pressure | 7250 psi |
WEDGE SET | |
Wedge set length N / L | 25 / 33 in |
Drillhole diameter | 3 in |
Drillhole depth N / L, min. | 29 / 37 in |
Splitting distance N / L | 7/8 / 1 in |
Theoretical splitting force N / L | 3307000 - 3968000 lbf |
CONSUMABLES | |
Darda Special Lubricant |
1. Joint – horizontal and vertical operation
Connected to carrier via upper mounting plate. Its alignment is not influenced by gravity.
Precise definition of the splitting direction and the splitting course possible due to hydr.
rotary drive. Only one machine operator required.
Easy positioning and setting of the splitting direction and the course of the splitting.
Full splitting force independent of the input pressure of the carrier thus always guaranteed.
5. Length splitting insert selectable
Two possible lengths can be selected depending on the type of rock and rock composition.
Hard metal layer of the counter wedges enables the transmission of the very high forces
and provides long-lasting protection against corrosion, seizure and wear.
Inquiry - Darda Rock Splitters C20 J